Animo
l.
Thermostat
2. Main switch green
3. Dry-boil safety guard
4. No-drip tap
5. Filling opening for waterjacket
6. Gauge glass waterjacket
General
MWR 5
Contents
Electronic connection : 1N~220-240V/50-60Cy/3200W
Heating time
MWR 10
Contents
Electronic connection : 1N~220-240V/50-60Cy/3200W
Heating time
MWR 20
Contents
Electronic connection : 1N~220-240V/50-60Cy/3200W
Heating time
MWR 40
Contents
Electronic connection : 1N~220-240V/50-60Cy/3200W
Heating time
Put in to use
*
Pour cold or hot water in the filling opening (5) till the water will be visible in
the waterjacket.
*
Put the plug into the plug-contact.
*
Switch on the main switch (2).
*
Adjust the thermostat (1) on the right temperature.
Dry-boil safety guard
The milkheater is protected by a dry-boil safety guard. This protection will come in at too
much scale deposit or when there is too little water in the waterjacket.
The resetknob of this dry-boil safety guard is mounted at the backside of the milkheater.
Remove the black cap. By pressing the little knob, the boiler can be switched on again.
However, notice that first of all the cause of the switching-off has to be determined.
MWR
: 5 litres
: cold water; 22 min.
hot water; 12 min.
: 10 litres
: cold water; 40 min.
hot water; 25 min.
: 20 litres
: cold water; 75 min.
hot water; 60 min.
: 40 litres
it is to be recommended to preheat the milk
with the 40 litres milkheater.
11/99