BOERBOEL GardDog Instrucciones De Instalación página 4

(Step 1 Continued)
g.) Insert the rear push button with rods though
the two pre-drilled holes in the rear of the post,
ensuring rods are visible on front side of post (Fig. 6).
h.) Secure rear push button with two 1" screws (Fig. 7).
i.) Align the front latch to the pre-drilled holes on front
of post. Be sure the two rods engage with the front
latch when held ush to the post (Fig. 8).
NOTE:
To be sure the two rods are engaged with the
front latch, you can push the rear button. If the
latch lever lifts and lowers when the button is
pressed, they are properly engaged. (Fig. 9).
To test the lock rod engagement, insert keys
into both locks and turn. If one key turns the
other key, the lock rod is properly engaged.
j.) Once the rods are properly engaged, secure the
front latch to the post with two 1" screws (Fig. 10).
4
Push Push
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Latch Latch
Lever Lever
Fig. 10