Kohler K-19034 Guía De Propietario página 6

Install Lavatory – K-19034 (cont.)
CAUTION: Risk of product damage. Do not overtighten the
cap nuts. Overtightening may damage the product.
Thread a cap nut and washer over each hanger bolt until the
washer and the cap nut are tight against the lavatory.
Connect and tighten the P-trap to the drain (not shown).
Complete the water supply connections to the faucet according to
the instructions packed with the faucet.
Run water into the lavatory and check for leaks.
Complete Installation
Wipe the surface around the lavatory to remove water and debris.
IMPORTANT! To avoid breaking or weakening the seal, do not
move or use the lavatory once the silicone sealant is applied.
Apply the silicone sealant around the perimeter of the lavatory.
Allow the silicone sealant to cure according to the silicone sealant
manufacturer's instructions before using the lavatory.
1052866-2-D 6 Kohler Co.