Troubleshooting - Westinghouse 40V MAX+ Manual De Usuario

Soporte inalámbrico
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

PROBLEM
Unit will not start.
Battery will not charge
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
To preserve natural resources, please recycle or dispose of batteries properly. This product contains
lithium-ion batteries. Local, state or federal laws may prohibit disposal of lithium-ion batteries in
ordinary trash. Consult your local waste authority for information regarding available recycling and/or
disposal options.
WARNING: Upon removal, cover the battery pack's terminals with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble battery pack or remove any of its components. Lithium-
ion batteries must be recycled or disposed of properly. Also, never touch both terminals with metal
objects and/or body parts as short circuit may result. Keep away from children. Failure to comply
with these warnings could result in fire and/or serious injury.
12
POSSIBLE CAUSE
Battery not installed properly
Battery not charged
Battery not inserted into
charger
Charger not plugged in
Surrounding air temperature
too hot or too cold
POSSIBLE SOLUTION
Check battery installation
Check battery charging
requirements
Insert battery into charger
until red LED appears
Plug charger into a work-
ing outlet.
Check current at recepta-
cle by plugging in a lamp
or other appliance.
Check to see if receptacle
is connected to a light
switch which turns power
off when you turn out the
lights.
Move charger and tool to
a surrounding air tempera-
ture of above 40 degree
F (4.5°C) or below 105
degree F (+40.5°C).
Tabla de contenido

Solución de problemas

loading

Tabla de contenido