Use And Operation - Klarstein 0031451 Manual Del Usuario

Control Panel and Remote Control
A Power indicator
B Swing indicator
C Speed indicators
High
mid
low
D OFF button
E TIMER button
F ON/SPEED button
G SWING button
H Time indicators
0.5-1-2-4 hrs

Use and Operation

1. Connect the appliance to a properly installed wall socket. The power indicator (A) lights up.
2. Switch on the appliance by pressing the ON/SPEED button (F) on the control panel. The fan starts to blow
at low speed. The low speed indicator (C) lights up.
3. To change speed, press button (F) several times. Speed will change with each button stroke. The respective
indicator (C) will light up.
4. For oscillation, press the SWING button (G). The swing indicator (B) light up and the fan starts oscillating. To
stop oscillation, press button (G) once again.
5. Your fan has a timer function. After having switched the unit on, press the TIMER button (E) and the fan will
operate for as long as you choose: Press the timer button several times and the setting will change with
every button stroke. The respective indicator lights (H) light up. When the set time has elapsed, the fan
switches off automatically. The fan can set the timer function from 0.5-7.5 hours, as specified by the sum
of the Time Indicators that are lit.
6. The air flow can be adjusted by tilting the entire motor unit upward or downward. Loosen the neck screw (9)
and adjust the motor until you have reached the desired vertical angle. Tighten the screw again.
7. To switch the fan off, press the OFF button (D).
8. Always unplug the appliance when it is not used.
Note on remote control
The buttons on the remote control have the same function as the buttons on the control panel. Make sure that
the batteries are inserted correctly into the remote control. Do not mix battery packs and replace all batteries
at the same time when changing batteries. Be sure to replace the batteries with batteries of the same type
(2xAAA).
Use and Operation
8