Fisher-Price 79151 Manual Del Usuario página 3

• Slide the gate door until both pads contact the other
opening surface.
• If the gate door will not slide far enough to contact the
other surface:
 Make sure the locking lever is unlocked. (See Installa-
tion and Use step
 The opening may exceed 36". Do NOT use the
Step Lock Gate in this location.
Top Pad
Bottom
Pad
Threshold
• Before locking the Step Lock Gate in position:
 Make sure at least three of the four pads contact
the surfaces.
 Make sure the Step Lock Gate is completely vertical
by checking to see if the top pads are directly aligned
above the bottom pads.
 Make sure the locking lever is unlocked. (Make sure
the top of the triangle on the locking lever aligns with
the top of the triangle on the threshold.)
 Make sure the threshold is flat on the floor.
• Step down on the locking lever until you hear a "click".
© 1997 Fisher-Price, Inc., East Aurora, New York 14052
Installation and Use
Gate Door
Top
Pad
Bottom
Pad
).
Top
Pad
Bottom
Pad
Locking Lever
• Always test to be sure the Step Lock Gate is secure
after each installation.
 Firmly shake the Step Lock Gate to be sure it is
securely in place.
 Check to be sure all four pads are contacting
the surfaces.
 Check to be sure the locking lever is completely down
and locked.
 Check to be sure the gate door is closed.
• If the Step Lock Gate is not secure, remove it from
the opening, and repeat Installation and Use steps
Installation is now complete.
Door
➤
Hook
Door
Release
Button
To open gate door:
• Grasp the handle on the gate door.
• Press and hold the release button while lifting the gate
door to release the door hook.
Please Note: The threshold is raised up from floor surface.
When walking through the gate, please be sure to step up
over the threshold.
3
Door Release
Button
Door
Hook
Handle
79151 1 79151-0920
– .