Tabla de contenido
EN
SUGGESTIONS FOR INTERNAL/EXTERNAL CABLE PASSAGE
Prearrange a through hole for the passage of the electric
cable. Warning: do not hole the flashing.
MAINTENANCE:
If the shutter does not slide freely, release the button and
check the cleanliness inside the guides.
Check periodically that inside the sliding guides there are
no objects that could prevent the correct functioning.
Maintain the inner part of the guides clean and lubricated
by using a dry synthetic lubricating spray, do not use
grease.
In case there is snow, ice or dirt in general, before operating
the shutter, free the sliding area.
Trouble
The rolling shutter stops when
going up or down
Cause
The shutter is jammed
30 cm
The use of an
inverter with
manned operation
is required.
230V/50Hz
power line
Solution
Check the shutter the guides
and the shutter's
traction springs inside the guides.
20
Tabla de contenido
