Kit Assembly - Metra 99-8722B Instrucciones De Instalación

INSTALLATION INSTRUCTIONS FOR PART 99-8722B
ISO DIN radio provision
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Mount the bracket/pocket assembly
to the radio housing trim panel with
the included #8 screws. (Figure B)
3. Slide the radio into radio brackets
and secure with screws supplied
with the unit. (Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
METRA. The World's best kits.

Kit Assembly

(Figure A)
™ 1-800-221-0932
(Figure B)
Metra recommends MECP
certified technicians
metraonline.com
(Figure C)
K P
NOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION