Whalen WSLPWS Instrucciones De Ensamble página 3

ASSEMBLY INSTRUCTIONS
1. Attach the Shelf (A) to assembly,Using Elbow (B)
and Straight joint (C) .
2. Attach the Base (D) and Elbow (B) to assembly.
Note:Base should be firmly tighten.
Option #1
3. For wooden stud wall installations, Using a stud
finder (not included), find 2 stud locations in the wall
and mark them with a pencil (not included). Draw a
level line at the desired installation height for Shelf (A).
1
A
A
B
C
2
D
B
3
Level Line
Stud Locations
4
ASSEMBLY INSTRUCTIONS
4. Secure Base (D) to the wall at marked stud lo-
cations with M4 x 50 mm Wood Screws (AA).
B
Hardware Used
M4 x 50 mm
AA
Wood Screw
Option #2
5. For drywall installations, drill a 3/8 in. pilot hole and
then marked location.
6. Insert Drywall Anchor (BB) until flush in the hole.
Secure Base (D) to the wall over the anchor with
M4 x 50 mm Wood Screws (AA).
Hardware Used
M4 x 50 mm
AA
Wood Screw
BB Drywall Anchor
4
D
x 16
5
Stud Locations
6
BB
D
x 16
x 16
5
AA
AA