KlipXtreme Rubic Manual Del Usuario página 3

Components and media
panel buttons
1. Subwoofer
6.5-inch low-frequency driver
3-inch full-range drivers
2. Satellites
Displays the input mode selected, the volume level, the track being played and
3. LCD display
the channel frequency
Insert a compatible storage device to play music files
4. SD card slot
TM
Insert a compatible storage device to play music files
5. USB port
Press this button to change the device from standby to active mode, and vice
6. Power button
versa in all the modes
Press and hold this button to turn off the unit
Press this button to lower the volume level of the speaker
7. VOL -
Press this button to increase the volume level of the speaker
8. VOL +
Press this button briefly to toggle among the available input modes: auxiliary,
9. Source
DVD, USB, SD
In USB, SD or Bluetooth
10. / TUN - TM
on your play list
Press and hold this button to scan channels in a downward direction
11. / TUN +
This feature is not available in auxiliary mode
In USB, SD or Bluetooth
TM
your play list
Press and hold this button to scan channels in an upward direction
This feature is not available in auxiliary mode
Picks up signals for the tuner
12. Antenna
Enables audio playback from devices fitted with a 3.5mm connector, such as
13. AUX and DVD inputs
computers, TV sets, MP3, DVD players, etc
Insert the AC plug into a wall outlet
14. Power cord
Description
; tuner and Bluetooth .
TM
®
mode, press this button to select the previous track
®
mode, press this button to select the next track on
®
Remote control
In addition to the top panel keys, a convenient control is included which provides additional functions to allow
greater control over the media player.
1
11
3
5
8
7
1. Install the supplied batteries in the remote control following the correct polarity as indicated inside
the compartment.
2. In order for the remote to operate properly, ensure that it is pointed toward the front of the speaker.
Buttons
It replicates the function of the Standby button on the front panel
1. Power button
Cancels the audio coming from the speaker. Press it again to unmute the speaker
2. MUTE button
Press this button to cycle through the available audio inputs. As there is no default
3. Source
mode assigned, the speaker will automatically start streaming audio based on the
last source used before the unit was turned off
Briefly press this button to cycle through the six different lighting patterns, and also
4. LED
to disable this feature
This button controls the high (treble) or low (bass) frequencies.
5. TONE
Note: To control the bass level from 00 to 30 and treble level from -6 to +6 press
and hold the volume button on the speaker panel. These can also be controlled
from the remote control by pressing volume + or volume -
In tuner mode, press and hold this button to start the automatic search and storage
6. MEMORY
of channels found in the band with a strong broadcast signal
Press these buttons to decrease or increase the frequency in steps of 0.1MHz
7. TUNING / TUNING
Press and hold to scan downwards or upwards, and tune the previous or next
available channel automatically
Press these buttons to increase or decrease the output volume of the speaker
8. VOL / VOL
In USB, SD
TM
9.
start and pause media
In Bluetooth
®
the speaker back into pairing mode
In USB, SD
TM
10. /
or next track on your play list
In tuner mode, it will scan downwards or upwards to the next memorized channel
Press any key from 0 to 9 on the remote control to choose directly the tracks you
11. Numbered keypad
want to play. In tuner mode, it allows the manual input of frequencies or the
selection of any of the previously stored channels
2
1 2 3
4 5 6
7 8 9
4
0
SOURCE LED
6
TONE MEMORY
9
10
TUNING- TUNING+
Description
or Bluetooth mode, briefly press this button to
®
mode, press and hold this button for several seconds in order to put
or Bluetooth mode, press any of these buttons to select the previous
®