Proper Use; Device Description - MAGLOGIX MX-750-HL Manual De Instrucciones

Proper Use

®
The Maglogix Hand Lifter (MX-750-HL) is a switchable magnetic clamp equipped with permanent magnets and is
designed for attachment to and the manual lifting (by hand) of ferromagnetic, metallic workpieces. The MX-750-HL
may only be used according to its technical data and determination. Proper use includes adherence to the start-up,
operating, environment and maintenance conditions specified by the manufacturer. The user bears sole
responsibility for understanding this operating manual as well as for the proper use and maintenance of this Hand
Lifter. Please contact the manufacturer if you have any questions prior to using this device.

Device Description

The MX-750-HL Hand Lifter's special design has a tightly compacted (shallow-profile) magnetic field that develops
an incredible attractive force especially on thin ferromagnetic materials of less than 10 mm. The MX-750 Magnetic
Clamp is switchable (ON/OFF) by means of a 60° manual activation lever (B). When switched and locked into the
ON position, internal permanent magnets generate a powerful magnetic field into the magnetic contact area (C)
and hold a ferromagnetic, metallic workpiece with incredible force. To deactivate the magnetic clamp, first lift the
activation lever at its far end upwards to disengage the lever from its latching notch and return by 60° into the OFF
position.
Note: Care must be taken because the activation lever can quickly/strongly spring back to the OFF position
when working on thin materials.
A strong and stable carrying handle (C) made of aluminum is attached to the upper side of the MX-750 Magnetic
Clamp. The load-bearing capacity of the Hand Lifter is equivalent to at least 1/3 of the maximum breakaway force
of the magnet. Please refer to the following Technical Data.
Note:
1) All dimensions shown in millimeters.
Be sure to read the operation instructions completely before using the Hand Lifter for the first
time!
A) Activation lever
B) MX-750 Magnetic Clamp
C) Carrying handle
D) Magnetic contact area
4