U-Tec Ultraloq Lever Guía De Instalación Y Programación página 17

4. Standalone Mode Programming Guide
It is recommended to use the U-tec App to program your lock. If you don't have a smartphone
or don't want to use the App, you may follow the programming instructions below.
Warning
Standalone Mode is NOT available after the lock is registered in
App! Please reset the lock to Factory Default Mode first to
program your lock in Standalone Mode.
4.1 Create an Owner
Creating the Owner must be the first step prior to any other programming.
Only one Owner is available.
Operation
Activate the Lock
Press and hold
Enter a 4-8 Digit Code then
Re-enter the Digit Code then
for 3 sec
- 16 -
Voice Message
Factory Default Mode, please set
up the lock with your smartphone
Please enter a 4-8 digit admin code
and press the Enter key to continue
Please enter your code again
and press the Enter key to continue
Registered