Starrett BAT 2A Manual De Instruccions página 82

ENGLISH
3. Due to LITHIUM-ION properties, the only time it is necessary to charge
is when it reached the end of its charge. The indication of the end of charge,
will occur when the power of the power tool drops quickly. CHARGE the Bat-
tery as needed.
INSTRUCTION TO CHARGE THE BATTERY:
A fully discharged Battery will charge about 30 minutes (with Charge BC 90W) in
the desired surrounding temperature.
1. ATTACH the Battery with the correct Charger (BC 90W), by aligning the
raised ribs of the Battery with the slot in the Charger (fi gure 03). SLIDE the
Battery onto the Charger;
2. TURN ON the Charger to a power source, according to its specifi cation.
OBSERVE if the correct voltage (Volts);
3. The Charger will communicate with the Battery's circuit to evaluate
the use conditions;
5. During normal charging, the GREEN LED on the Charger will fl ash con-
tinuously;
6. After charging is complete, the GREEN LED on the Charger will be on.
The Power Indicator LED lights will not be displayed when the Power Indica-
tor Button is pressed while the Battery is on the Charger;
7. The Battery will fully charge, but will not overcharge, if left on the
Charger.
82 BAT 2A / BAT 4A