How To Operate - Nostalgia Products IGLOO Manual De Instrucciones

HOW TO OPERATE

DIRECT WATER LINE HOOKUP
You have the ability to connect a water supply line for direct water tapping. Provided
is a direct water line kit. Instructions on how to set up are below. NOTE: Direct
water line hookups may vary, so additional purchases may be necessary.
Tubing
1. Place the end of the tubing and insert it into the Water Inlet Hole, which is located
on the back of the ice maker. NOTE: When not in use, put Water Line Plug in.
2. Screw the other end of the Quick Connect Shut Off Valve onto the
steel compression fiting. Make sure that it's screwed on tight.
3. One side of the fitting will screw onto the water pipe while
the other will screw into the water faucet as seen.
WARNING: Make sure all fittings are tightened so there is no chance of a water leak.
Quick connect
shut off valve
Compression
fitting
6