Sricam MiNi IP Camera Manual De Usuario Rápido página 4

Step4. Add the camera on App
Add new device
4-1
Add device
IPCam
Device offline ,please choose
camera network connection mode
Smart Wi-Fi AP Hotspot
Note:Tap
Smart Wi-Fi
4-4
English
Add device
Note: The "Device ID" can
be found on the label which is
attached to the camera.
4-2
Add device
Your device is offline.Please check the
device's network connection
Step1,Power on the device(IP camera)
Step2,Connect the device to network:
1.If device with RJ-45 LAN port, connect
device with your router or switch with a
net-cable, wait about 30 seconds,tap
"Back" to re-add device;
2.If device without RJ-45 LAN port, tap
"Smart Wi-Fi Setting" to add the device
Smart Wi-Fi Setting
4-5
-3-
Add device
IPCam
Input password(default:888888)
Note: Here take camera
ID:404087 as an example.
4-3
Add device
Your device is offline.Please check the
device's network connection
Step1,Power on the device(IP camera)
Step2.1,Wait until you hear continuous
beeping sound from the device, tap
"Next" to add the device
Step2.2, If didn't hear the continuous
beeping sound within 1 minute, reset
the device by press the "Reset" button
with a Reset pin for 10 seconds until
you hear a clash sound from the device,
then wait until hear the beeping sound
from the device, tap "Next " to add the
device
4-6