Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating Controls and Features
32
24
23
25
22
26
21
27
1. Decimal Selector. Allows selection of up
to eight decimal settings +, F, 0, 1, 2, 3, 4, 6.
For example, when set at 2, all totals and
results will contain two decimal places; at 0 no
decimals will be printed or displayed. In
Floating (F) decimal setting, results are
expressed at maximum decimal accuracy.
When working with dollars and cents, the
Decimal Selector can be set at Add Mode (+),
eliminating the need to enter the decimal
point.
2. D/PD/N Switch. Allows the choice of
operating in Display only (D position), or both
Print and Display without N Count (PD
position), or both Print and Display with N
Count (N position). Changing from Display
only position to Print and Display position will
print a row of red dots, the displayed value
with an audit of "P", the Accumulator amount
(with N count if applicable), the Grand Total
amount (with N count if applicable) and a row
of red dots.
While in the D position or PD position, N Count
is "OFF". In the N Count (N) position every
Plus, Minus, Equals Plus or Equals Minus key
depression is counted. The Accumulator and
its N Count or the GT N Count can be printed
by depression of the Subtotal or Total key. N
Count is always printed in red, left justified. If
the Equals key is depressed immediately after
the Subtotal or Total, the average of the
entries is printed.
NOTE: Correctable N Count. A depression
of Minus immediately following an erroneous
Plus or Equals Plus key depression will correct
the Accumulator and its N Count. If GT is on,
then the GT register and its N Count will be
corrected as well. A depression of Plus will
31
30
29
19
18
17
20
16
12
correct an erroneous depression of Minus or
Equals Minus in the same manner.
3. GT Switch. In the Neutral Mode
any entry made with the Plus or Minus key and
any result obtained from depression of the
Equals Plus or Equals Minus key is either added
to or subtracted from the Accumulator.
In the Grand Total (GT) position any entry that
is added to or subtracted from the Accumulator
is also added to or subtracted from the GT
Accumulator. A second depression of the
Subtotal or Total key will give the grand
subtotal or grand total respectively of all
previously accumulated entries.
In the ◊ position a running subtotal will be kept
in the display. The Subtotal and Total keys
operate as described with the GT Switch in the
GT position.
4. Grand Total Lamp. When illuminated,
indicates that an amount is being retained in
the Grand Total Accumulator.
5. Accumulator Lamp. When illuminated,
indicates that an amount is being retained in
the Accumulator.
6. Numeric Key Pad. Enter number 0 thru 9
and a decimal point just as you would write
them. The entry will not be printed until a
function key is depressed.
7. Plus Key. Adds an amount to the
Accumulator. To add the same amount more
than one time (repeat addition), enter the
amount once and depress the Plus key as
many times as necessary.
8. Minus Key. Subtracts an amount from the
Accumulator. To subtract the same amount
more than one time (repeat subtraction), enter
28
1
15
14
13
6
position
2
2
3
4
D PD N
8
7
that amount once and depress the Minus key
as many times as necessary.
9. Total Key. Prints and clears the
Accumulator.
10. Subtotal Key. Prints but does not clear
the Accumulator.
11. Non-Add/Date Key. This key serves
three functions. First, it will print a live entry as
an identifier (such as an invoice number) or a
date. Second, it will store a live entry so that it
may be recalled for later use as an identifier or
constant. Third, when the D PD N selector
switch is in the D (display only) position press
#/Date to override the display only setting to
print an intermediate sequential calculation
result.
To print and store a date (e.g., 7/1/01), enter
the month and depress the Decimal Point key,
the date and Decimal Point, and the year and
depress the Non-Add/Date key. To recall the
contents of the Non-Add Register, depress the
Non-Add/Date key.
12. Times Key. To multiply, enter the first
number (multiplicand) and depress the Times
key; then enter the second number (multiplier)
and depress any Equals or Percent key, i.e.,
Equals, Equals Plus, Equals Minus, Percent, to
obtain a result.
13. Equals Key. Completes multiplication and
division.
14. Divide Key. To divide, enter the number
to be divided (dividend) depress the Divide
key. Then enter the second number (divisor)
and depress any Equals or Percent key, i.e.,
Equals, Equals Plus, Equals Minus, Percent, to
obtain a result.
5
11
10
9
Tabla de contenido
