Programming Instructions - Aroma Quest AQ-B4 Manual De Instrucciones

4. Remove the original cap from the bottle of fragrance and screw the nozzle into it before installing.
Then insert the bottle vertically into the equipment, pressing the nozzle against the diffuser until it
clicks into place.
5. Close the diffusers ´cover until it clicks. Insert the padlock and lock it with the key

PROGRAMMING INSTRUCTIONS:

Date-Time Settings:
1. If the display is in Standby Mode, press the SET button until it shows the local time to be changed.
Otherwise, go to the next step
2. Press SET until days of the week flashes. Use the arrows to chose the current and press ENT to
approve.
3. Then use the arrows to chose the time (hours and minutes) and press ENT when done. The diffuser
operates under the 24-hour time system.
4. Use ENT as many times as needed to double check date-time settings. Then press SET to accept
these changes when done.
5. If you leave any of the previous steps without saving, the machine will remain on and static until the
schedule resumes, the changes are recorded and the diffusion starts.
Memory Setting:
1. The equipment allows programming up to 5 memories that work simultaneously. Set each of them
so that they do not match in schedules or intensity of fragrances. Otherwise, the diffuser won´t
operate properly.
2. While in Standby Mode, press SET until you see the backlit display. Press SET again to choose
(from 1 to 5) the memory to be programmed and then press ENT to enter. Remember that the first
one is the default memory.
3. Use the arrows to chose the starting time (hour and minutes). Press ENT to accept
4. Use the arrows to chose the finishing time (hour and minutes). Press ENT to accept
5. Chose (from 1 to 10) level of the fragrance, being "1" the softest and "10" the most intense. press
ENT to accept.
Knowing how many hours per month the diffuser will work (use the Hours per Month Calculation
Worksheet from this manual) find the closest value to that number in the left column of the
Performance Guide and decide, according to the greys, if you want the smell to be: Soft,
Intermediate or Intense. With that, chose from the duration-in-days suggested and the result
will be, at the top of the table, the appropriate fragrance intensity level to be used when
programming .
6. Set with the arrows (on or off) the days that the diffuser must operate during the newly chosen hours.
Press ENT to accept or reject every day of the week. Each day of the week that is activated will be
underlined and flashing on the display.
3