Dyna-Flo DG732ELA-D Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
CAUTION: This unit is heavy. Do not
attempt to lift without assistance.
3. With the assistance of a second person turn
the smoker on its back. To avoid damage to
the smoker and rear handle, use a flat, soft
surface like a carpet, blanket or cardboard
box.
Remove each of the front cabinet legs by
turning them in a counterclockwise motion.
Note: An adjustable wrench may be needed
to loosen the leg bolts. Remove the bolts on
each of the rear casters.
Please retain the disassembled rear
casters and all bolts for the next series of
steps.
Store the front legs, for future use, if
desired.
CAUTION: This unit is heavy. Do not
attempt to lift without assistance.
4. With the assistance of a second person turn
the smoker upside down. Attach the leg
assembly to the bottom of the smoker using
two M10 x 20 hexagon bolts (CC) and the
eight M4 x 10 bolts from the previous step.
Tighten all bolts securely from step
1 using a Phillips screwdriver and
adjustable wrench.
Hardware Used
M10 x 20
CC
Hexagon Bolt
3
Front Cabinet
Leg (left/right)
M4 x 10 bolt
(pre-installed)
4
x 2
7
Rear Caster
Rear Caster
M4 x 10 bolts (8pcs)
previously disassembled
CC