How To Install The Protection Guard - Pecol V20 Brushless RBPROHP Manual Del Usuario

With PECOL Li-ion technology, the battery will keep the power tool operating at a
constant behaviour, regardless of the level of the battery charge, suddenly dropping
when the minimum charge is reached. The protection circuit of PECOL Li-ion technology
prevents it from being used beyond the minimum charge. However, there is a relaxation
of this protection when the machine is left standing for a while and when the switch is
turned again, the motor will start and run until the protection system is activated and the
motor is switched off again. To avoid permanent damage to the battery, avoid insisting
on use having already reached this level.
Max. 20V
To facilitate ventilation, keep
a minimum distance of 5.0
cm from the charger to other
objects.

3.7. How to install the protection guard

1. The guard should be positioned so as to
protect the user and persons from particles,
sparks and possible projections of pieces of the
disc.
2. Once adjusted in the desired position, tighten
the fast set screw so that the guard can not be
moved by hand.
P.58
PT ES
A
EN FR
A
A
A > 5 cm
Clamping level