Repair And Maintenance; Replacing The Fuse - Razor DUNE BUGGY Manual Del Usuario

REPAIR AND mAINTENANCE

Check the Razor web site for any updates on the latest repair and maintenance procedures.
Turn power switch off before conducting any maintenance procedures.
q Replacing the Fuse
POWER
OFF
1
Make sure the power switch is
turned off.
4
Close the fuse cover.
q Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and
your purchase.
1
Using a bicycle style tire pump
equipped for a Schrader-type valve,
inflate the front tire to the PSI
indicated on the sidewall of the
tire.
2
Locate fuse cover near the
battery .Open the fuse cover to
expose the fuse.
Amperage
number
3
Remove the fuse and replace
with a new one of equal
amperage.
Note: Amperage rating is
located on top of fuse. Fuse must
be replaced with one of equal
amperage.
3
WARNING: To prevent
shock or short circuit, please follow
the instructions in order and do not
skip or combine any steps.
Note: The pressurized air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate
your Dune Buggy tires, first make
sure the pressure gauge is working,
then use very short bursts to
inflate to the correct PSI. If you
inadvertently over-inflate the
tire, release the excess pressure
immediately.