Tabla de contenido
Idiomas disponibles
Idiomas disponibles
F
Rubber Bumper
(4 used in this step)
30. Pick up the Left Door (O) and attach the extended hinge arms to the hinge bases installed on the Left
Lower Side Panel (F). Loosen the bolt on the back of Hinge Base for an easy fit. Align and insert the
"U" slot on hinge arm under the bolt head on the back of hinge base. Make sure that both door hinges
engage and function properly. Tighten the bolt on the hinge base to lock the hinges in place.
31. Repeat the same procedure to attach the Right Door (P) to the Right Lower Side Panel (G).
32. Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the
screws for a good fit. Refer to the hinge sticker on door for adjustment.
33. Stick the Rubber Bumpers (6) on the outer corners of Left and Right Doors (O and P) where they come
in contact with the Lower Partition Panels (H and J).
Assembly Instructions
O
⑥
G
24
P
6
1
6
O/P
Tabla de contenido
