Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Insert rubber glide foot "K" into the threaded
hole on the side of the corner. Spin M10 nut
"N" onto the top of the rubber glide foot.
5. Repeat steps 1 through 4 on the Front Left
corner "A".
6. Attach 3" wheel "J" to Rear Right corner "F".
a. Insert extra bolt into the axle hole from the
inside of the corner. Insert the bolt into the
wheel housing just far enough to act as a
"hanger" for the nylon wheel bushing "R".
7. Carefully align 3" wheel "J", and insert M6-55
bolt "S" through hole in the outer edge of
wheel housing, through wheel "J", through
nylon bushing "R".
8. Secure the axle bolt using using M6 flange
nut "P".
9. Repeat steps 6-8 for back-left corner "E",
assembly is now complete!
a. Test mobility without machine.
b. Add machine and secure it to the mobile
base.
10. Lift your machine or item to be mobilized into
place.
CAUTION: Check stability in both the up
and down positions before using.
Failure to follow safety and assembly
instructions may result in personal
injury or damage to product.
4
J
6
7
8
9
7
N
K
R
F
J
S
P
Tabla de contenido
