Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety First
Please review the following safety precautions. If this is your first time using a satellite receiver, read this
manual before installing or using the satellite receiver. If the receiver is not functioning properly, please
contact your distributor or system installer.
ELECTRIC SHOCK HAZARD
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE THE COVER
NO USER-SERVICEABLE PARTS ARE INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
●Be careful with electricity:
○Power Outlet: To prevent electric shocks be sure the electric plug used on the receiver's power cord
matches the electric outlet used to supply power to the receiver. Connect the power cord only
to a power source that operates at 90 ~ 260 Volts AC, 50/60 Hz.
○Power Plug: If a three-prong power plug is provided with the receiver, be sure it is used with a properly
grounded three-wire power socket.
○Power Cord: Be sure the power cord is routed so that it will not be stepped on or pinched by heavy items.
○Power Overloading: Avoid overloading electric outlets or extension cords, which could result in an electric
shock or fire.
○Natural Calamities: To protect the equipment from natural calamities when the receiver is left unused for a
long period, disconnect it from the power source.
○Power Lines: Be sure your satellite dish is not located near overhead power lines, or where it might fall
into any power lines. Also be careful to avoid touching any such power lines when installing
the satellite dish.
○Antenna Grounding: Be sure the satellite dish is grounded to provide protection from lightning and
build-up of static electricity.
●Also follow these precautions:
○
Ventilation: Do not block the ventilation slots on the receiver, or place any heavy objects on top of it.
Blocking the airflow may damage the receiver. Arrange the components so that the air can
flow freely around the receiver. Ensure that there is adequate ventilation if the receiver is
placed in a stand. Put the receiver in a properly ventilated area, away from direct sunlight or
any source of heat.
○Overheating: Avoid placing the receiver on top of a hot component such as a power amplifier.
○Risk of Fire: Do not place the receiver on top of easily combustible material, such as carpet or fabric.
○Proper Connections: Ensure that all cables and equipment are connected to the receiver as described in
this manual.
○Object Entry: To avoid electric shock, never place anything in the slots of the case, and never remove the
cover.
○Water Exposure: Exposure to mist, rain, etc., may lead to electric shock or catching of fire.
Package Contents
Unpack the receiver and verify that all of the items listed below are included. When the receiver has to be
sent for troubleshooting or upgrading, it must be enclosed in the same case. Examine all the items to ensure
that nothing has been damaged during shipment. If any of the items are damaged, then contact your service
provider or local distributor before continuing with installation.
•
ESR-T200 Terrestrial TV Receiver
•
Remote Control Unit (with 2 AA batteries)
•
Power Cable
•
User Manual
•
SCART Cable
•
RF Coaxial Cable
•
RJ-11 Phone Line
RECEPTOR DIGITAL MHP DRAKE ESR-T200
！
1
Tabla de contenido
