Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Rear Brackets:
Drill 5/16" hole for nut and bolt
4. Tighten the pinch weld bracket to the main brackets.
5. Center the board on the truck and then tighten the board to the main
brackets.
6. Double check to be sure all nuts and bolts are tight.
PRODUCT SPECIFIC WARNINGS:
Ø Do not stand on boards while vehicle is in motion
Ø Do not use boards to fasten cargo to vehicle
Ø Do not exceed 350lbs weight on the running board
Ø Do not use the bracket as a jacking point
Ø Periodically check the bracket hardware for tightness
a2003 Lund International, Inc. Lund Accessories Division, All Rights Reserved
775 Tipton Industrial, Lawrenceville, GA 30045
For customer service, please call 1-800-328-4843
For more information about Lund, please visit our website at
PN: 45039
¼" nut and bolt
0884
Do not use
www.lundinternational.com
4
Drill 1/8" hole for
self-tapping screw
Tabla de contenido
