3. To put the tray back in place simply proceed in reverse order. Make
sure the food carriage has been re-installed correctly before
restarting or storing the appliance.
4. The pusher can be cleaned in warm soapy water. Rinse well after
cleaning. Do not put in the dishwasher.
5. DO NOT IMMERSE THE APPLIANCE IN WATER OR ANY OTHER LIQUID!
To remove the blade:
1. ensure the unit is off, unplugged and the blades have come to a
complete stop.
2. Remove the food tray or move it to the left.
3. Use the blade lock handle to turn the blade lock (3) clockwise. Use
the little handle to pull the blade away from the unit.
4. Wash the blade in warm soapy water. Do not wash in the
dishwasher! Let it dry thoroughly.
5. Clean the housing behind the blade with a dry cloth or a soft brush.
to put the blade back in place, proceed inversely and lock the
blade by turning the blade lock counter-clockwise.
6. DANGER! BLADE IS VERY SHARP!
STORAGE
When not in use, it is recommended that the thickness adjustment dial
gets turned down all the way until the mark "0", so that the blade's
sharp edge is concealed - this to avoid any risk of accidental cuts or
injuries.
www.KALORIK.com
8
AS 45493 – 180330