Tabla de contenido
BEFORE REQUESTING SERVICE
WARNING
Disconnect the electrical supply before servicing or cleaning the unit. Failure to
do so could result in electrical shock or personal injury from cleaner suddenly
starting.
Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
PROBLEM
POSSIBLE CAUSE
Cleaner
1. Unplugged at wall outlet.
will not run.
2. ON-OFF switch not turned on.
3. Tripped circuit breaker/blown
fuse at household service panel.
Poor job of dirt
1. Full or clogged dust bag.
pickup.
2. Broken belt.
3. Clogged hose or nozzle.
4. Hose not inserted fully.
5. Worn agitator.
6. Hole in hose.
7. Dust cover improperly installed.
Dust escapes
1. Bag improperly installed.
the paper bag.
2. Bag torn.
Electrical Shock or Personal Injury Hazard
- 44 -
POSSIBLE SOLUTION
1. Plug in firmly. Push ON-OFF
switch to On.
2. Push ON-OFF switch to ON.
3. Reset circuit breaker or replace
fuse.
1. Change bag.
2. Replace belt.
3. Clean hose or nozzle area.
4. Insert hose.
5. Replace agitator.
6. Replace hose.
7. Properly install dust cover.
1. Properly install bag.
2. Replace bag.
Tabla de contenido
