Lantheus Medical Imaging VIALMIX Guia Del Usuario página 4

Q U I C K S TA RT
I N S T R U C T I O N S
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
NOTE:
Vialmix ® will
not operate with
cover open.
Do not open
cover while Vialmix
is operating.
Wait 7 minutes
between
activations.
If the cycle i s
interr upted fo r any
reason, the Defin i t y
v ial is unusable.
Retain vial
and contact
Lantheus Medical
Imaging Technical
Services.
(See pg. 10.1)
Keep cover closed
when not in use.
1.1
5 1 5 3 7 0 - 0 8 1 0
-
S E T U P
R e m ove packaging, including red transport collar from base of vial carr i e r.
■
Place Vialmix
®
■
Connect Vialmix
■
cord. Non-grounded plug adaptors should never be used.
®
Power on Vialmix
■
LED display briefly shows "88," then "45."
■
O P E R AT I O N
I N S E RT I N G V I A L A N D A C T I VAT I N G D E F I N I T Y
(
P E R F LU T R E N L I P I D M I C R O S P H E R E
1 Press lever downward and to the left to open the carrier.
2 Hold Definity
by first placing the top of the vial in the left cup of carrier;
position vial between the two cups.
3 Release the lever; then close the Vialmix
4 Press START and countdown from "45" to "00" will begin.
R E M OV I N G V I A L
1
When the full 45-second cycle is complete, open Vialmix
2 Press lever downward and to the left to open the carrier.
3 Remove vial.
®
4
Close the cover.
P O W E R I N G O F F V I A L M I X
Vialmix should be powered off at the end of the day by moving the switch
®
on the back of the unit to "0."
on a flat surface and verify voltage compatibility.
to the main power source using enclosed power
®
by moving switch to "1."
®
vial between thumb and fingers and load vial
®
:
®
V I A L F O R
®
)
I N J E C TA B L E S U S P E N S I O N
cover.
®
:
cover.
®