Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Instruction
Your new MATCO Spray Gun has been manufactured with precision machinery and is constructed
to perform under demanding professional requirements. To ensure maximum efficiency and best
painting results, knowledge of the components and proper handling and maintenance is essential.
Properly handled and cared for, your spray gun will produce beautiful, uniform finishing
results during its long life.
Benefits
• Atomizing air pressure is 29psi. (2.0kg/cm2)
• Finest atomization with low pollution
• Air consumption is only 10.1~10.2 cfm
• Transfer efficiency around 65% (reference only)
• Low overspray
• Suitable for any paint material including water-borne paint
Fluid
Air Pressure for automization is regulated at an extractor;
please use the lowest possible atomizing air pressure for
maximum efficiency!
WARNING: NEVER POINT SPRAY GUN TOWARDS THE FACE AND BODY
MTPGHV13
MODEL:
MTPGHV15
MTPGHV17
MTPGHV19
Air Inlet
Air Hose
1.3 mm
Product Type:
1.5 mm
GRAVITY FEED HVLP
1.7 mm
SPRAY GUN
1.9 mm
Dual action trigger
• spray air only
• air and paint
Use a regulator for
best performance and
to increase efficiency
Page 2
0.6 liter
plastic canister
Paint control adjustment
Spray width
adjustment
29 PSI
2.0 KG/cm
2
Air In
Tabla de contenido
