Installation; Essential Assembly Instructions; Installation Of Tekbox - Espa TEKBOX SM Manual De Instrucciones

I N S T R U C T I O N M A N U A L

3. INSTALLATION

3.1. Essential assembly instructions

Installation and assembly should be carried out by and authorised installer.
The installation should be carried out in accordance with safety regulations for swimming pools,
in particular regulation EN 60364-7-702 and those relevant to each application.
For people's safety, it is imperative that the filtration group be installed at a distance of no less
than 3.5 m from the pool according to the demands of the regulations currently in force.
If it is installed less than 3.5 m from the pool, it is forbidden to use the equipment when the pool is
being used.

3.2. Installation of Tekbox

To carry out a safe installation we recommend you proceed as follows.
3.2.1. Carry out the escavation according to the measurements indicated and according to the version of
Tekbox. Flatten the bottom and create a gravel base.
3.2.3. Electrical supply.
Perforate the unit on the side where you wish the electrical supply to enter.
You are advised to protect the cable with appropriate tubing and secure the cable with a packer.
3.2.4. Position the Tekbox. It is ready to lifted by its lifting hooks.
GB
A
720
TEKBOX SM
930
TEKBOX NT