First Use - Moulinex Turbomix Plus Serie Instrucciones De Seguridad

DESCRIPTION
A - Motor unit
B - On/Off button
C - Mixer foot (plastic or metal
depending on model)
D - 0.8 L (26.7 oz) beaker
(depending on model)
E - 150 ml (5 oz) mini-chopper
(depending on model)
The attachements included in the model you have bought are represented
on the top of the packaging.

FIRST USE

Before using for the first time, wash
the mixer attachment (C) in and all
of the accessories hot water and
use washing-up liquid, rinse and dry
carefully.
Mixer attachment
• Screw the mixer attachment (C)
onto the motor unit (A). Turn it as
possible without over tightening.
(fig. 4)
• The mixing bowl you choose must
not be filled to more than 50cl
(15oz) to avoid overflowing. The
preparation must at least cover the
flared bottom
attachment to ensure that the mixer
operates efficiently.
• Remove the cooking recipient from
the source of heat when mixing hot
preparations. Do not hesitate to
move the mixer attachment (C)
around in the recipient to get
optimum results.
• Do not operate the appliance for
more than 15 seconds consecutively,
otherwise let it cool down.
• Place the hand blender shaft in the
mixture, immersing only the head,
of the mixer
E1 - Cover
E2 - Cutter
E3 - Mini-chopper bowl
F - Multi-strand whisk (depending on
model)
F1 - Reducer
F2 - Whisk
turn the appliance on and leave to
blend.
• There is no need to pound the
mixture to achieve a good result.
150ml mini-chopper
• Before using the 150 ml (5 oz) mini
chopper, carefully place the cutter
(E2) into the bowl (E3) on the
central drive. Place the ingredients
in the bowl. Fit the cover (E1) onto
the bowl and then fit the motor unit
(A) onto it. (fig. 5)
• To remove the accessory after use,
remove the motor unit (A) from the
cover (E1), then carefully remove the
cutter (E2) (holding it by the plastic
part), then remove the ingredients.
• This 150 ml (5 oz) min-chopper can
be used to chop herbs and mince
meat. With this accessory you can
mince 70 g (2.5 oz) of raw chicken
fillet in 3 seconds.
Multi-strand whisk (depending on
model : fig.7 F
Maximum running time: 2 minutes.
• Fit the multi-strand whisk (F2) onto
the reducer (F1).
• Fit the reducer (F1) onto the motor
unit (A).