hafele Ditec Olly E Manual De Instalación Y Mantenimiento página 7

≥ 20
OUTSIDE
OPEN
INSIDE
OLLY E OLLY E
OUTSIDE
OPEN
INSIDE
B
Fig. 5
≥ 20
OLLY E OLLY E
Fig. 6
A
Fig. 7
Fig. 8
3. INSTALLATION
3.1 Verify the installation situation, left opening (fig.5),
right opening (fig.6).
3.2 (Fig.7) Remove the plate [A] and insert the belt
as shown in fig. 5 or 6. Close the plate again [A].
3.3 (Fig.8) Fix the belt fastening brackets [B] to the
wing.
3.4 (Fig.2) Fix the automation onto the wall near the
opening side of the wing and fasten the belt to the
brackets.
NOTE: The wing stroke must be limited by suitable
stops.
Make sure there is a distance of at least 20 mm
between Olly E and the belt fastening bracket [B] when
wing is completely open or closed.
3.5 Pull the belt manually. Perform any adjustment
by working on the wing, on the belt fastening
brackets [B] or on the wall fastening screws.
3.6 Fix the push-button station with 161 control panel
on the wall: flush mounted (fig.3) or surface
mounted (fig.4).
7