Commercial Electric R1615D36 Guía De Uso Y Cuidado

Item #1003 407 105
Model #R1615D36
INSTALLATION INSTRUCTIONS
USE AND CARE GUIDE
COMBINATION RECEPTACLE / USB CHARGER
CLASS2 5VDC 3.6A
FEATURES
1. The Receptacle provide two 5V DC powered USB ports with a total of
3.6A charging current.
2. Charge most compatible electrical device directly without an adapter.
3. If the devices combined power requirements exceed the power capacity
of the USB ports, the charger will shut down to protect your electrical
devices.
4. Replace a standard Single or duplex receptacle.
5. Compatible with USB 2.0/3.0 devices. The USB ports are used to charge
portable electronic devices ONLY (NO data transfer capability).
6. Back and side wire for easy installation.
APPLICATION
• Cafes • Labs • Of ce
• Restaurants • Bedroom • Hotels
• Salons • Kitchens • Meeting Rooms
• Libraries • School • Workstations
• Airport Lounges
COMPATIBILITY
The USB Charger is compatible with USB powered devices such as:
• iPad ® • iPhone ® • iPod ®
• GPS • Game Systems • Mobile Phones
• E-Readers • Blackberry • Tablets
• Bluetooth • Headsets • Digital Cameras
®
THANK YOU
We appreciate the trust and con dence you have placed in Commercial Electric through
the purchase of this USB charger. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Commercial Electric!
PRE-INSTALLATION
TOOLS REQUIRED
Phillips Screwdriver
SPECIFICATIONS
Receptacle Rating 15 Amp, 125V AC
USB Rating 3.6 Amp, 5V DC
Wire terminals #14 - #12 AWG
Operating Temperature -4 to 104℉(-20 to 40℃)
Dimension 4.17x1.69x1.65" (106x43x42mm)
WARNING: To avoid re, shock, or death; turn off power at circuit breaker
or fuse and test that the power is off before wiring!
WARNING: To be installed and/or used in accordance with appropriate
code and regulations.
If you are not sure about any part of these instructions, consult
WARNING:
an electrician.
To be used with Class 2 connectors with interconnecting
WARNING:
cables.
WARNING: The Class 2 USB ports are not intended for use with appliances
and supporting products.
All connected Class 2 output cables must be routed away from
WARNING:
the receptacle slots or any plug/cord inserted into the receptacle.
WARNING: Use this device with copper or copper clad wire only.
INSTALLATION
1.This device is to be installed in a wall box measuring at least 3" x 2" x
2-1/2" (standard single gang electrical wall box) and wired in accordance
with NEC article 314 box ll requirements.
2. Connect wires per WIRING DIAGRAM as follows:
NOTE: Back and side wire terminals accept #14-#12 AWG copper or copper
clad wires.
a. To side wire: Loop wire around terminal screws and rmly tighten
terminal screw.
b. To back wire: Insert wires through terminal holes in the back, tighten
terminal screws rmly.
3. Mount device in wall box with screws provided and mount
wall plate.
4. Restore power at circuit breaker or fuse. Installation is complete.
11in
WIRING DIAGRAM
Strip Gage
Back wire:
3/5"
15mm
Side wire:
4/5"
20mm
CLASS2 5VDC 3.6A Neutral
Hot
White
Black
Cu AI
Ground
Green
1.3(33mm)
1.69(43mm)
WARRANTY
The manufacturer guarantees this product to be free of defects in materials
and workmanship for 1 year from the date of purchase. If this product is
defective, call 1-877-527-0313 for repair or replacement parts or return the
product to the store from which it was purchased. This guarantee does not
include normal wear and tear.
Contact the Customer Service Team at 1-877-527-0313 or visit
www.HomeDepot.com.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the equipment
into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for
help. Any changes or modi cation not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
Questions, problems, missing parts? Before returning to the store,
call CE Tech Customer Service
8 a.m.- 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
8in