Wiring Configura Tions - Orion Cobalt CO104S Manual Del Usuario

WIRING CONFIGURA TIONS

The following illustrations provide guidelines on properly connecting your Orion
Cobalt woofer to an Orion Cobalt amplifier for maximum performance.
Recommended Amplifier Power
1 woofer
2 woofers
3 woofers
4 woofers
Parallel—Two Speakers ( 4 ohm voice coils)
Two 4 ohm voice coil woofers with the two woofers in parallel results in a 2 ohm load
to the amplifier.
Figure 2
Figura 2
Abbildung 2
1. Connect the speaker in parallel by connecting the two positive (+) terminals
together and the two negative (-) terminals together.
2. Wire the positive (+) terminals of the woofers to the positive (+) terminal on the
amplifier. Wire the negative (-) terminals of the woofers to the negative (-) terminal
on the amplifier.
4
Continuous Power (RMS)
100 to 300
200 to 600
300 to 900
400 to 1200
_
4 ohm
+
Peak Power (Watts)
200 to 600
400 to 1200
600 to 1800
800 to 2400
_
4 ohm
+
+
_
© 2012 MD Audio Engineering—all rights reserved