Controller Modes - Chauvet DJ Foot-C Guía De Referencia Rápida

Foot-C™ QRG
The Foot-C™ has the following operating modes. For detailed instructions on
Controller
how to use these modes, and how each mode interacts with other modes, read the
Modes
user manual available from www.chauvetlighting.com.
The chase option offers several scene/look combinations that cycle through preset
Chases
options on your product and can be programmed using the scenes mode. There
must be scenes already saved on the Foot-C™ before chases can be programmed.
Sound
This mode creates a sound-activated show using the built-in microphone or Audio
Line Input. Use the Audio Sensitivity knob to adjust the sound sensitivity.
This will switch scenes or chases to the beat of the music.
The <MUSIC/AUTO/BLACKOUT> pedal darkens all fixtures. To turn
Blackout
Blackout off, press and hold the <MUSIC/AUTO/BLACKOUT> pedal button
again.
To program Scenes;
Scenes
1.
2.
3.
4.
5.
To delete Scenes;
1.
2.
3.
4.
Scenes that have no data entered will be automatically skipped during
playback.
Hold <Program> button until indicator LED light turns on.
Select the fixtures you would like to assign the scene to using the <Fixture
1-6> buttons.
You are now in programming mode. You can create your scene by manually
adjusting the color fader knobs to achieve desired color and then push the
<Program> button to save.
Press the <UP> or <DOWN> foot pedal buttons to move between scenes
(1–24).
Repeat steps 2–4 for your remaining fixtures.
Hold <Program> button until indicator LED light turns on.
You are now in programming mode. Select the fixtures you would like to
delete a scene from using the <Fixture 1–6> buttons.
Navigate to the Scene you wish to delete using the <UP> or <DOWN> foot
pedal buttons.
Delete scenes by pressing and holding the <Delete> button until the LED
display flashes.
7
EN