Tabla de contenido
Attach Wall Plate
STEP 2B
CAUTION:
Avoid potential personal injury or property damage!
•
Mount the wall plate
•
Minimum solid concrete thickness: 8 in. (203 mm)
•
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1.
Position the wall plate
2.
Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
12
directly onto the concrete surface
15
on the wall at your desired height. Level the wall plate and mark the two hole locations.
15
15
Solid Concrete or Concrete Block Installation
Concrete Installation Kit is not included
(see page 5) Contact Customer Service at
877-689-1665 to have the additional hardware
shipped directly to you.
2
3 in. (75 mm)
3/8 in.
(10 mm)
Tabla de contenido
