ANSMANN 1700-0068 Manual Del Usuario página 6

HOW TO USE
> Capacity indication
Please press the power button to check the remaining power.
ƒ ƒ
4 LEDs light up:
ƒ ƒ
3 LEDs light up:
ƒ ƒ
2 LEDs light up:
ƒ ƒ
1 LED light up:
NO LIGHT ON:
The POWERBANK is completely discharged. Please recharge the POW-
ERBANK immediately. If the POWERBANK is not in use for a longer time,
it is necessary to charge up the POWERBANK before storage to avoid
any damage of the internal battery.
> HOW TO CHARGE THE POWERBANK:
Connect the supplied Micro-USB plug of the USB cable to the POWER-
BANK and the USB plug to the USB socket of a computer or a suitable
USB charger. The charging process starts automatically. During the
charging process up to 4 flashing LEDs indicate the current charge
level of the POWERBANK. When the POWERBANK is fully charged, all 4
LEDs light up constantly.
> HOW TO CHARGE OTHER DEVICES:
To charge a device, e.g. a smartphone or a tablet, please use the
supplied USB cable (if the Micro-USB plug fits in your mobile device)
or the original charging cable for your device. Connect the USB plug
of the cable to the ANSMANN POWERBANK and the other end to your
device. The charging process starts automatically. While charging
your device, the battery status of the POWERBANK's internal battery is
indicated by the LEDs.
Please disconnect your device from the POWERBANK when it is fully
charged. The POWERBANK will turn off automatically.
Depending on the charge / discharge current, the POWERBANK can
heat up slightly.
Deutsch | English
Svenska | Italiano | Nederlands | Dansk
75%-100%
50%-75%
25%-50%
1%-25%
| Français | Pусский | Español | Português