Idiomas disponibles
Idiomas disponibles
T
1.
2.
R
3.
4.
R
IMPORTANT:
Cleaning the Airvolution separation unit
This cleaner uses the Airvolution separation system, unique to Candy. If necessary the
Airvolution separation unit can be removed from the dust container and cleaned.
1.
Remove dust container from the cleaner by releasing the container carry handle to detach
the dust container from the main cleaner and pull upward to remove. [15]
2.
container. [22]
3.
Using the dust container handle lift the dust container upper section containing the
separation unit from the lower section. [23]
4.
Use a cloth to remove excessive dust from the separation unit's surface.
5.
Reassemble the dust container upper section. Push clips back to fully close the dust
container. [25]
6.
R
down until the latch connects with the main body of the cleaner. Once correctly retained
Removing a blockage
1.
Check if the dust container is full. If so refer to 'Emptying the dust container' .
2.
If the dust container is empty but suction is still low:
A.
B.
Check if there is any other blockage in the system - Use a rod or pole to remove any
C.
C
D.
Check if the separation unit needs to be cleaned. Refer to 'Cleaning the separation
unit' .
XarionFilterPro_union_pp.indd 3
[19]
[20]
[21]
[24]
If so refer to 'C
USER CHECKLIST
Should you have a problem with the product, complete this simple user checklist before calling
your local Candy service.
Remove
•
Is there a working electricity supply to the cleaner? Please check with another electrical
appliance.
•
Is the dust container over lled? Please refer to 'Cleaner Maintenance' .
•
Is t
lter blocked? Please refer to 'Cleaner Maintenance' .
•
Is the hose or nozzle blocked? Please refer to 'Removing a blockage' from the system.
•
Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically
reset.
IMPORTANT INFORMATION
Candy spares and Consumables
Always replace parts with genuine Candy spares. These are available from your local Candy
dealer or direct from Candy. When ordering parts always quote your model number.
Consumables:
•
Hepa Pre-Motor Filter: S104 C - 35601119
•
Hepa Exhaust Filter: T101 C - 35601120
Spares:
•
Complete Hose: D101 C - 35601118
•
Carpet and Floor Nozzle: G72 C - 35601086
Candy Service
Should you require service at any time, please contact your local Candy Service O
Quality, Safety and the Environment
Safety
believe that independent approval is the best way of demonstrating safety in design and
manufacture. The British Electrotechnical Approvals Board (BEAB), the independent UK national
authority for the safety of domestic electrical appliances, ensures that European safety standards
are met and maintained throughout the production life of an appliance. All appliances that pass
the requirements are permitted to carry the BEAB mark of safety.
3
GB
Candy
28-04-2010 16:29:49
