Simple IS4824 Manual De Instrucciones

INSTRUCTION MANUAL
IS4824 - 4-Port USB Charger
Each USB port can charge up to 2.4A
Remove the product from the box.
Do not tug on the wires when removing.
Unwrap cords and insert the car charger Into your front 12V port (cigarette jack)
Unravel the cable completely. To hide the cable, run it between your front seat and center console.
Clip the charging hub to your front seat's back pocket, or adhere it to the back of your center console.
To adhere the hub, you will need to remove the back clip (see below instructions) and apply the
enclosed double-sided adhesive sticker to the back of the hub. Then stick the hub onto the console on
any smooth surface to secure.
Front seat car charger will charge two devices (smartphones, tablets, cameras)
Back seat charging hub will charge two devices (smartphones, tablets, cameras)
Each USB port can charge up to 2.4A
Visit Us: isimple.com
Front Seat Car Charger Install
Plugs into front 12V port
Back Seat Charging Hub Install
Option 1: Clips onto front seat back pocket
Option 2: Remove back panel clip. Use
enclosed double-sided adhesive sticker to
mount onto any smooth surface.
slide up and lift out
How to Remove Back Clip
Slide clip up to unlock
Pull straight out to remove from hub