Sun Microsystems Sun Fire Guía De Administración página 43

Ocultar thumbs Ver también para Sun Fire:
Tabla de contenido
Consulte la publicación Sun Fire Entry-Level Midrange System Controller Command
Reference Manual para obtener una descripción detallada del comando setupnetwork.
En el
EJEMPLO DE CÓDIGO 2-2
lom> setupnetwork
Network Configuration
---------------------
Is the system controller on a network? [yes]:
Use DHCP or static network settings? [static]:
Hostname [nombre_host]:
IP Address [xxx.xxx.xxx.xxx]:
Netmask [xxx.xxx.xxx.x]:
Gateway [xxx.xxx.xxx.xxx]:
DNS Domain [xxxx.xxx.xxx]:
Primary DNS Server [xxx.xxx.xxx.xx]:
Secondary DNS Server [xxx.xxx.xx.x]:
Connection type (ssh, telnet, none) [ssh]:
Rebooting the SC is required for changes in the above network settings to take
effect.
lom>
Utilice la información del
debe escribir como valor para cada parámetro.
EJEMPLO DE CÓDIGO 2-2
Ejemplo de resultados del comando setupnetwork
EJEMPLO DE CÓDIGO 2-2
Capítulo 2 Encendido y configuración de los sistemas de gama media básicos Sun Fire
se muestra un ejemplo del comando setupnetwork.
como guía para la información que
21
Tabla de contenido
loading

Este manual también es adecuado para:

5.19.0

Tabla de contenido