Rapid Resume Logic; Battery Information; Replacing The Battery; Battery Disposal - Python 4115P Guia Del Propietario

Rapid Resume Logic

This Directed system stores its current state to non-volatile memory. If the
power to the system is disconnected and then reconnected, the system
recalls the stored state from memory.

Battery Information

The remote control is powered by a single coin cell battery (CR-2032)
that can be purchased at most retailers. The operating range diminishes
as the battery charge depletes.

Replacing the Battery

1. Use a small flat blade screw driver and insert it into the slot located
along the bottom of the remote, near the key ring. Carefully pry
open the case.
2. Gently remove the circuit board from the remote case by pushing
in on the button, then remove the battery from the holding clip.
3. Orient the new battery for the correct polarity and insert into the
holding clip.
4. Reposition the circuit board and case parts, then snap together by
pressing firmly and evenly on the front and back.

Battery Disposal

Directed cares about the environment. If you need to dispose
of the battery, please do so in accordance with your munici-
pal requirements for battery disposal or return to Directed.
8
© 2015 Directed. All rights reserved.