Metra AT-512CR Instrucciones De Instalación página 16

Chrysler Sebring
1995-2000
1. Unclip the radio trim bezel and remove. (Figure A)
2. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
3. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)
Chrysler Town & Country
(convertible)
1990-1995, Dodge
Caravan/Plymouth
Voyager 1984-1990
1. Reach behind the ashtray and release the rear tab
on the ashtray housing.
2. Remove (2) screws from the bottom edge of the
dash trim bezel. (Figure A)
3. Remove (3) screws from the top edge of the dash
trim bezel. Unsnap the left edge of the bezel and
remove. (Figure A)
4. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
5. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A)
Dash Disassembly
(Figure B)
16
Dodge Caravan/Plymouth
Voyager 1991-1995
1. Remove the cigarette lighter.
2. Using a panel removal tool, pry out on the dash
trim bezel and remove. (Figure A)
3. Remove (2) 3/8" bolts securing the factory head
unit and disconnect the wiring.
4. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)