Italtecnica Crono Spy Instrucciones Para El Uso página 25

INSTALLER PARAMETERS:
These parameters are located in concealed screens and are normally only modified during the installation
phase. To access these pages, press and hold "+" and "-" simultaneously for 5 seconds. After accessing
the concealed menu, use the arrow key ">>" to scroll through the screens and keys "+" and "-" to modify
the parameters. To return to the main screen, press and hold keys "+" and "-" simultaneously for 5
seconds.
PROGRAMMING THE OPERATING TIMES:
Crono Spy has two daily ON and OFF programs; within the two programmed time bands, the electric
pump is started up at regular intervals (for example every 15 minutes) to verify the presence of water on
intake. Within a set time interval (settable by the user) if there is not a sufficient water flow to maintain
the internal flow switch activated, the pump is stopped and a new cycle is repeated after the programmed
interval.
Set Time: this screen enables entry of the current time to ensure correct
operation of the programmed daily time band. Use keys + and – to modify
the parameter value.
Set Day: this screen enables entry of the current day of the week (e.g. 1 =
Monday). Use keys + and – to modify the parameter value.
Language: the language of the menus and alarm messages can be
personalised as required. Use keys + and – to modify the parameter value.
Setting of program <1>
ON <1>: this parameter enables entry of the starting time for the first
operating interval. Use keys + and – to modify the parameter value.
OFF <1>: this parameter enables entry of the end time for the first
operating interval. Use keys + and – to modify the parameter value.
GG <1>: this screen enables selection of which weekdays the first
programmed operating period is active. The options available are:
1234567 = all days of the week
12345 = from Monday to Friday
67 = Saturday and Sunday
246 = even days (Tuesday, Thursday, Saturday)
1357 = odd days (Monday, Wednesday, Friday, Sunday)
25