Instructions - Oasser P2 Manual De Instrucciones

Instructions

1.
Please connect the inflator to the battery pack or the 12V DC power
2.
Choose the suitable trachea and rotate it into the inflator, by the other end of
the trachea, just connect it to the tire value nozzle. While there needs connect-
ing to the balls, inflatable toys, or the French value, please choose the compati-
ble adapter.
3. Please press the "
lamp of the inflator will be turned on.
4. Please press the "
The screen will display the current pressure.
5. Please press "+" & "-" to set the desired pressure. Short press is slow adjust-
ment, long press is fast adjustment. After setting, the value in the screen will
flash for 4 seconds, which means auto setting is completed (Or you can press
the " " to complete the setting)
6. Press power button to start inflating. The inflator will stop inflating automatically
when the pressure reaches the preset value, and you can put off the trachea
and finish inflating.
Attention: Please firstly put off the inflatable side of trachea adapter, and then
remove the other side of the inflator's trachea, which to avoid both the tyre and
the inflator's pressure leaking
7. If you want to pause or terminate inflating, you can press the Power button to
switch off.
Automatic power off: Oasser inflator has automatic power off setting, it will
8.
automatically shut down in 90 seconds without any operation.
9. Air hose/Trachea can be inserted to the trachea groove of the inflator when you
don't need it.
10. In the process of inflating, there will produce the heat that generated by high
pressure, please pay attention to preventing burns, it is recommended to
operate with our gift gloves.
" button to activate the LCD display, and the top LED
" button to switch the value units: PSI, BAR, kg/cm2.
4