Cleaning And Maintenance; Technical Data - camry CR 1150 Manual De Uso

Before first use, expand the power cord and antenna. Do not cover the ventilation holes.
SETTING THE CLOCK
1. When connected to power the display shows 00:00. Press MEM / CLOCK (6). Displays shows 12 or 24. To set the clock mode 12H or
24H use the knob and confirm with CLOCK (6). The unit will enter the
confirm with button (6).
2. Set the time using the knob (11) and confirm with
3. Set the minutes using the knob (11) and confirm with button(6).
SETTING THE ALARM
1. In standby mode, press and hold ALARM 1 or ALARM 2 (7 or 8). The display will show an adequate icon.
2. Use the knob (11) to set the desired alarm time and confirm by pressing the appropriate ALARM button (7 or 8)
3. Turn the knob (11) to set the desired minute of alarm and confirm by pressing the appropriate ALARM button (7 or 8)
4. Turn the knob (11) set the desired alarm sound source: beep (buzz), FM or AM radio (AM / FM) or USB.
5. Turn the knob (9) to set the desired alarm volume and confirm by pressing the appropriate ALARM button (7 or 8).
6. After setting the alarm, you can turn it on or off by pressing the ALARM (7 or 8).
7. When the alarm is running, you can turn it off by pressing STANDBY (1) or the corresponding button ALARM (7 or 8).
8. When the alarm was triggered, the device can enter a state of "snooze" by pressing "SNOOZE" (8). Then the device will switch off for
9 minutes, then the alarm function is activated again.
AUTOMATIC SHUT-OFF
1. When the device is turned on, press SLEEP (4) the several times to select the time after which the device is switched off (90, 80, 70 ...
10 minutes).
2. The icon on the display indicates that automatic shutdown is activated.
3. After the selected time the device turns off and switches to standby mode.
4. To disable this function, press STANDBY (1).
CHANGING BRIGHTNESS OF DISPLAY
1. To change the brightness of the display, press SNOOZE / DIM (5) the appropriate number of times.
USING YOUR DEVICE CONNECTED BY UNIVERSAL JACK INPUT AUX IN:
1. Connect the external device to the player through the AUX IN (13).
2. Switch player mode service by pressing the AUX IN FUNCTION (2).
USING YOUR DEVICE CONNECTED BY BLUETOOTH:
1. Put the player in the Bluetooth
2. Activate the Bluetooth feature on your external device and select the device called CR1151. If necessary, enter the password "0000".
LISTENING TO RADIO
1. Set the radio reception AM or FM using button FUNCTION (2).
2. Use the knob (11) to tune in the desired radio frequency. After pressing the button (3) device will automatically search for nearby
frequencies. Once it is found the search will stop.
3. In order to remember the frequency of a radio station, press and hold for 2 seconds
„01". Using the knob (11) select the program number under which you want to save a radio station.
4. Confirm the program number by pressing
5. Repeat steps 2-4 to program the stations (max. 20 x AM, 20 x FM).
8. To choose between preset programs, press the button (6), and then select the number of the program knob (11).
9.. Using the knob (9) you can set the volume.
10. FM antenna is located on the back panel. If the signal reception is weak, try moving the antenna and find a place where the signal is
strongest.
11. Use button MO / ST (10) to switch between mono and stereo reception. To change hold for 2 seconds. Changes can be made only
with good reception of radio station.
PLAYING MP3 FILES FROM MEMORY USB
NOTE: The device may not be compatible with all files due to differences in coding and not work with some USB flash drives (more than
8GB).
1. Insert the USB stick in the slot (12).
2. Select the mode using button FUNCTION (2).
3. Then, the device will start playing the first song.
4. Using the PLAY / PAUSE (9), you can pause and repeat playback of the song.
5. Turn the knob (11) you can choose to play either the previous or next track.
6. Press the STOP (7) to stop playback.

CLEANING AND MAINTENANCE

1. Disconnect the radio network.
2. The unit can be wiped with a dry cloth only.
3. The device should be stored in a dry place.
NOTE: Do not use water to clean, it can damage the device.

TECHNICAL DATA

Power supply: 230V ~ 50Hz
RMS Output Power: 2x 1.5W
Power: 15W
button
operation mode by pressing the button FUNCTION (2)
again the button (6). The program number will stop flashing.
hours edition mode. Select a time using the knob (11) and
(6). The device will go into minutes edition mode.
the button MEM / CLOCK (6). Displays shows