Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1
Tighten the headset lock nut to the point where the steering is okay but
also tightened to the headset.
2
Remove the collar clamp bolts with the 5 mm Allen key provided.
3
Push and thread the stem onto the body until it's up against the headset
lock nut.
4
Re-insert collar clamp bolts. Ensure handlebars and front fork are in line
with each other then tighten collar clamp bolts. Alternate between the 3
bolts in order to tighten to a safe level.
5
To mount the front wheel, use the attached bolt. Tighten the bolts so the
wheel is moving but still sitting strong to the fork.
6
To mount back wheel you need to use the spacers and the longer bolt that
is attached. Tighten the bolt to a safe level.
MAINTENANCE
•
Regularly check that the various screwed parts are tight , particulary the
wheels axeles , the fold axis , the brake shaft, and the head tube locking
collar and suspension because the
•
self -tightening screws or other attachment may lose their effectiveness.
•
Always replace used parts with original parts.
•
Remove any sharp fragments caused by use.
•
Keep the scoter in a dry ,dust-free place.
•
Do not modify or transform the scooter , specifically the steering column
and socket, the stem,
•
The folding mechanism and back brake .
•
Check the condition of the bearing and wheels regularly , and replae them
if necessary.
EN
11
Tabla de contenido
