Engine Switch; Starter Grip - Pulsar PWP20 Instrucciones De Manejo

Operating Instructions & Parts Manual
2 Inch & 3 Inch Water Pump
Starting The Engine
5) Turn the engine switch to the ON position. The engine

Engine Switch

switch enables and disables the ignition system. The
engine switch must be on the ON position for the engine
to run. Turning the engine switch to the OFF position
stops the engine.
ON
6) Operate the Recoil Starter: Pull the starter grip lightly

Starter Grip

until you feel resistance, then pull briskly. Return the
starter grip gently. Pulling the starter grip operates the
recoil starter to crank the engine.
7) If the Choke lever has been moved to the Closed
Choke Lever
position to start the engine, gradually move it to the
Open position as the engine warms up.
Open
Close
11