Configuration; User Manual - PNI SAFE HOUSE PG230 Manual De Usuario

EN
SPECIFICATIONS
• Input voltage: 230V / 10A / 50-60Hz
• Output voltage: 230V / 10A / 50-60Hz
• Maximum supported power: 2000W / 10-13A
• WiFi frequency: 2.412GHz - 2.484GHz

CONFIGURATION

Search in Google Play or AppStore for Smart Life or TuyaSmart app or scan the code below. After
installation open the application and register.
Note: PNI PG230 is also compatible with Alexa and Google Home.
SmartLife Android
CONFIGURATION VIA TUYA SMART APP
1. Connecting to the WiFi network
• Open the application, press "+" in the upper right corner to add devices. Select "Security &
Sensor" → "Wi-Fi Socket".
• Power the device to a 230V power outlet.
• The red light flashes to indicate that it is in the pairing status.
Notes:
If the LED does not blink, reset the device by pressing and holding the ON / OFF button for 5-7
seconds or unplug and plug again the 230V power outlet.
If the LED is constantly lit blue, it means that the socket is in the ON status. Press the ON / OFF
button briefly to turn the power off. Now the red light should blink.
• Confirm in the application if the device is blinking.
• From the following interface, select the WiFi network to which you want to connect the device
and enter the password
• Wait for the phone and device to sync.
• The newly added device will appear in the main interface of the application
2
SmartLife iOS Tuya Android Tuya iOS

User manual