Adjust Settings; Introduction; General Setup Page; Closed Captions - Soundstream H-540DiMT Manual De Instrucciones

Adjust Settings

Introduction

This chapter describes how to use the SETUP
menu. Most settings and adjustments are required
to be set when you first use the system.
1
Press the SETUP button.
2
Press the , buttons to select a setup page .
 
3
Press the , buttons to select an option and
 
then press the button.

4
Press the , buttons to select a setting and
 
then press the ENTER button .
- To return to the previous menu, press the
button.
- To exit the menu, press the SETUP button.

General Setup Page

TV Display
The shape of the television or monitor may
not match the shape of the movie frame. To
avoid distortion on older televisions, you may
need to change the way in which the image is
displayed. Televisions use a 4:3 aspect ratio;
high-definition televisions use 16:9 aspect ratio
(as do movies).
Note:
You may need to read your television's manual
in conjunction with this section in order to
achieve the best results. Some discs do not
allow the aspect ratio to be changed and you will
therefore have to change the aspect ratio on the
TV.
Make this setting while playback is stopped; you
cannot do this while playing a disc.
NORMAL/PS
This mode is used with 4:3 televisions. 4:3 im-
ages are displayed normally. When showing
16:9 programmes, the full height of the screen is
displayed, and the left and right parts of the im-
age are cut off.
NORMAL/LB
This mode is used with 4:3 televisions. 4:3 im-
ages are displayed normally. 16:9 images are
visible at their full width, but there are blank
areas at the top and bottom of the screen.
WIDE
Use with a 16:9 wide television.
OSD (On Screen Display) Language
Select the desired language for on screen
menus of the unit.

CLOSED CAPTIONS

On/Off
Turns on/off the CC subtitle when playing some
DVDs which included this funtion.
Screen Saver
On
The screen saver starts up if nothing is played
back and no operations are performed for 4
minutes.
Off
The screen saver does not start up.
Last Memory
On
Select this to make last memory function
available.
Off

Select this to disable last memory function.

Audio Setup Page

Analog Audio
LT/RT
5.1 channel audio is mixed into left channel
and right channel and is output via FL and FR
speakers respectively.
Stereo
5.1 channel audio is mixed into stereo signal and
is output via the FL and FR speakers.
Off
Select this to disable this function.
Note:
Only for Dolby AC-3 encoded 5.1- channel discs.
3D Processing
This setting provides following sound effects:
Off, Concert, Living Room, Hall, Bathroom,
Cave, Arena, Church

Video Setup Page

Quality
You can adjust some parameters of video picture.
1
Highlight "Quality" and press the
2
Use the
Sharpness
This adjusts the sharpness of the picture shown
on the monitor.
Select High, Medium or Low using the Cursor
buttons, and press the ENTER button.
Brightness
This adjusts the brightness of the picture.
Use the left and right buttons to change the
value, and press the ENTER button.
Contrast
This adjusts the picture contrast.
Use the left and right buttons to change the
value, and press the ENTER button.
14
/ buttons to select the parameter.
 
button.
