Sunjoy L-GZ332PAL-C El Manual Del Propietario página 5

Fig.9: Connect Short beam 2 (2L), Top slanting bar (2A) and Short beam 1 (2C) by using bolt ( EE), washer (BB) and nut
(FF).
Fig.10: Attach short beam 2C (2L) to decorative beam by using bolt (AA) and washer (BB).
Fig.11: Connect Left support beam of long side 1 (2G), Middle beam (2B) and Right support beam of long side 1 (2D)
by using bolt (EE), washer (BB) and nut (FF).
Fig12: Connect Left support beam of long side 1 (2G), Top slanting bar (2A) and Right support beam of short side 1 (2I)
by using bolt (EE), washer (BB) and nut (FF). Connect Left support beam of short side (2K) and Right support beam of
short side 1 (2I) in same way as Fig.11 & Fig.12.
Fig.13: Connect Right support beam of long side 3 (2F), Middle beam (2B) and another Right support beam of long side
3 (2F) by using bolt (EE), washer (BB) and nut (FF). Note: fix the end of 2F with one connect hole to middle beam
(B).
Fig14: Connect another end of Right support beam of long side 3 (2F), Short beam 2 (2L) and Left support beam of
long side 2 (2H) by bolt (MM), washer (BB) and nut (FF). Note: fix the end of 2F with two connect holes to short beam 2
(2L). Connect another end of Left support beam of long side 2 (2H), Top slanting bar (2A) and Right support beam of
long side 2 (2E) by using bolt (EE), washer (BB) and nut (FF). Connect other support beam in same way.
Hardware Pack 3
AA
BB M6 bigger washer
DD
EE
LL
FF
GG
M6x15 bolt
M6x15 bolt
M6x60 bolt
M6x40 bolt
M6 nut
M6x35
8 PCS
38 PCS
12 PCS
4PCS
2 PCS
4 PCS
8 PCS