1. Safety nstructions
Connect the equipment to a grounded power supply to ensure the safety of the
equipment and the experiment. Connect the power when the equipment
requires it.
The use of this equipment in inflammable and explosive, toxic, or highly
corrosive experiments is forbidden.
Place the Vortex mixer on a flat, horizontal, and steady surface, leaving at
least 30 cm of free space on each side.
The Vortex mixer must be only used by qualified staff aware of the
equipment's handling in this manual.
Do not overfill the testing tubes, only testing tubes with stopper can be used
with this device.
Make sure that only trained staff operates this equipment.
In case of abnormal conditions during the mixer's performance, please, unplug immediately the
device and contact your supplier/manufacturer.
While using the equipment, use personal protective equipment according to the substance's mixing
hazard category to prevent the risks from:
Splashing and liquids evaporation
-
Toxic or flammable gas releases
-
Projected parts
-
Do not use this equipment in explosive and flammable environments, or with hazardous materials.
The equipment can only be disconnected from the power supply by pulling out the socket, do not
pull the wire.
Make sure that the power supply's voltage matches the necessary electric input for this device.
2. Use Instructions
This equipment is designed for mixing substances with educational purposes, in laboratories, or industry.
This article is not suitable for use in residential areas or dangerous environments.
3